Keyence LS-Navigator User Manual download pdf (Page 56)

LS-Navigator-M-NO5-E

5-24

5-10 Setting the Measurement Conditions for the Program

Click on the [Area settings] tab in the

program setting area.

The [Area settings] window appears.

Set which area of the target to measure.

Area settings

Select the measurement method from the pull-down menu.

Measurement

method

Type of measurement

DIA Set this method when measuring the outer diameter of a round bar or a transparent body. This method

measures the target from the first falling edge (an edge where a bright portion becomes dark) to the last

rising edge (an edge where a dark portion becomes bright).

T- E D G E Set this method when measuring the gap between rollers or when setting a position. T-EDGE measures the

width of the first bright portion on the top of the target.

B-EDG

E Set this

method when measuring the gap between rollers or when setting a position. B-EDGE measures the

width of the last bright portion on the top of the target.

SEG Set this method when measuring the inner diameter of a disk or when measuring pitch.

This method measures the width between two specified edges: the start edge where measurement is

started and the end edge where measurement is finished.

Parameter range: 0, ±1 to ±127, E or P

Copies the calibration settings from area 1

or area 2 and pastes them into area 1 or

area 2.

Set the detection threshold value

when measuring a target that has high

transparency. Enter a value into the

text box.

Parameter range: 10 to 99%

Set two areas

(area 1 or area

2) on the

measurement

target.

Select [ON] or [OFF] from the pull-down

menu. When the parameter is set to [ON],

set the total number of edges for

measurement. When the value has a

different number of edges, the

measurement value becomes invalid. This

prevents the output of measurement values

that are incorrect due to dust or oil on the

measurement head.

Parameter range: 2 to 127

Select the head (head 1 or head 2) to use

for measurement.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 67 68

Comments to this Manuals

No comments

Keyence LS-Navigator User Manual Page 56

Comments to this Manuals

Related products and manuals for Sensors Keyence LS-Navigator