Keyence AP-C40(P) Series User Manual download pdf

Digital Pressure Sensor

with 2-Color Display

AP-C40(P) Series

Instruction Manual

1. Safety Precautions

WARNING

●

Do not use this product in safety circuits such as those designed to

protect human workers.

●

This product does not employ an explosion-proof construction. Do not

use it in the presence of flammable gasses, liquids, or powders.

●

This is a direct current power supply type sensor. Application of an

alternating current may result in explosion or fire.

■ Accessories

96M1402

3. Sensor Head Installation

●

1 connector cable (2 m)

●

1 unit scale label

2. Part Names

SET AP-C40 MODE

MPa

Pressure display units

*Apply the units sticker here.

Pressure display

Mode button

Manual adjustment button

Set button

Wiring

connector

Sensor head

connector

Mounting screws

(M3 x 2)

Operational indicator /

Output 1, Output 2

1 2

●

1 instruction manual

1) Cut the cable to an appropriate

length and strip away about 25

mm of the outermost insulation.

Note: It is not necessary to

remove insulation from the

core wires.

2) Insert the cables after aligning

them with the colors on the seal

on top of the connector body.

About

25 mm

About

25 mm

Connector

body

Connector

cover

Connector

lock

Orange

Brown

Blue

Gray

Pressure

connection

3) Press together the body and the

connector cover into which the

cables were inserted to make a

connection (use a pair of pliers

or similar tool to press them to-

gether).

4) Insert the sensor head connec-

tor into the hole of the amp unit.

To remove the connector, de-

press the connector lock and

pull it out.

* Do not reuse sensor head

connectors that have already

been pressure-connected.

Insert until you hear a

clicking sound.

4. About Sensor Head Installation

Common Do not subject the case to pressure sufficient to deform

its shape during installation.

AP-41(M) • Use a torque of 0.3 N

•

m or lower to tighten the screws

43 • 44 for the sensor head conduits.

AP-48 Use a torque of 5 N

•

m or lower to tighten the screws for

the sensor head conduits.

Take care that no foreign objects enter the sensor when

opening one of the pressure ports to atmospheric air.

Take care not to bend the pressure ports.

Connect the “High” port to the high-pressure side of the

system and the “Low” port to the low-pressure side.

5. Mounting Brackets (option)

Dedicated mounting hardware is available for the sensor, allowing it to be

installed in a range of locations.

Horizontal mounting bracket Wall mounting bracket

(AP-BO1) (AP-BO2)

Faceplate/ceiling mounting bracket Tilted mounting bracket

(AP-BO3) (AP-BO4)

●

1 sensor head connector

1 2 3 4 5 6

Summary of Contents

Page 1 - Instruction Manual

1Digital Pressure Sensorwith 2-Color DisplayAP-C40(P) SeriesInstruction Manual1. Safety PrecautionsWARNING●Do not use this product in safety circuits

Page 2 - circuit

28. Detection Mode Operation General-purpose mode (F-1)This mode allows the user to configure 2 detection points.Control output 1: Turns ON when pres

Page 3 - 9. Sensor Configuration

3Detection modeOperating modeStandardFocus modeHigh-speedZero shift inputAnalog outputN.O./N.C.2.5 msec5 msec100 msec500 msecGeneral-purpose modeVaria

Page 4 - Bottom hold value:

410. Explanation of Features Focus modeFocus mode increases all display resolutions by a factor of 10.Normal mode Focus modeThe following focus cente

Page 5 - WARRANTIES AND DISCLAIMERS

514. Default Mode Settings (Initialization)The sensor ships with the following configuration.Detection modeOperating modeN.O./N.C. switchingAnalog/zer

Page 6

Comments to this Manuals

No comments

Keyence AP-C40(P) Series User Manual

Browse online or download User Manual for Sensors Keyence AP-C40(P) Series. KEYENCE AP-C40(P) Series User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Sensors Keyence AP-C40(P) Series