Keyence DL-PN1 User Manual download pdf (Page 16)

- PROFINET Communication Unit DL-PN1 User's Manual (IB) -

*1 Functions assigned to the external input request 1 to 4 are as follows:

• External input request 1: ZERO SHIFT input

• External input request 2: RESET input

• External input request 3: TIMING input

• External input request 4: ADJUST input

Functions assigned to the external input request 1 to 4 can be changed.

Refer to the IB series user's manual.

*2 If the judgment value is correct, the parameter range is

- from - 999.97 to +999.98 (percent mode).

- from - 99.997 to +99.998 (size mode).

In percent mode:

• When the comparator value is over range, "+999.99" is stored.

• When the comparator value is under range, "-999.99" is stored.

• When the comparator value is invalid, "-999.98" is stored.

• When an error occurs, "+1000.00" is stored.

In size mode:

• When the comparator value is over range, "+99.999" is stored.

• When the comparator value is under range, "-99.999" is stored.

• When the comparator value is invalid, "-99.998" is stored.

• When an error occurs, "+100.000" is stored.

 Access Address (Slot 1 to 4)

180 to

191

Reserved for system

192 Setting error

When the sensor amplifier

setting is abnormal, the

corresponding bit is set.

2byte

WORD

bit0 : Reserved for system

bit1 : Slot 1

bit15 : Slot 15

193 EEPROM writing

When the sensor amplifier is

reflecting the setting after the

setting change, the

corresponding bit is set.

2byte

WORD

bit0 : Reserved for system

bit1 : Slot 1

bit15 : Slot 15

194 Laser emission stop status

When the light emission of

the sensor amplifier stops,

the corresponding bit is set.

2byte

WORD

bit0 : Reserved for system

bit1 : Slot 1

bit15 : Slot 15

Index

(DEC)

Function name Description

Data

type

Attribute

Value

Index

(DEC)

Function name

Description

Data

type

Attribute

Default

value

Value

0 Reserved for system

1 Zero shift request DINT C

2 Zero shift reset request DINT C

3 Reset request DINT C

4 Error clear request DINT C

5 Initial reset request DINT C

System parameter set request

DINT C

7 to 9 Reserved for system

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Comments to this Manuals

No comments

Keyence DL-PN1 User Manual Page 16

Comments to this Manuals

Related products and manuals for Sensors Keyence DL-PN1