Keyence DL-CL1 User Manual download pdf (Page 32)

3-4

Communicating with the SK-1000 Series

- CC-Link Compatible Network Unit DL-CL1 User’s Manual (SK-1000) -

3-2

Device Maps

The device maps vary as described in "Selecting an Operating Mode of the DL-

CL1" (page 3-3). Select an operating mode suited for the functions of the sensor

amplifiers to be used, before accessing each device.

The following device maps are used for when the operating mode is small-memory

mode 1, small-memory mode 2, or monitor mode 1.

In cases of monitor mode 2, full mode 1, and full mode 2, see "Device Maps for

Monitor Mode 2, Full Mode 1, and Full Mode 2" (page 3-12).

Remote input RX (DL-CL1 -> master station)

Device Maps for Small-Memory Mode 1, Small-Memory Mode 2, and Monitor Mode 1

Operating

mode

Device no.

(HEX)

Name

Communication

method

Description Reading range

Small-memory mode 1

Small-memory mode 2

Monitor mode 1

RX[n] + 00

to 07

HI ID 01

to ID 08

Sends the HI output state (ON/

OFF) of the sensor amplifier.

The HI output of each sensor

amplifier (ID 01 to ID 08)

corresponds to each RX.

0: OFF

1: ON

RX[n] + 0F Error status-

The DL-CL1 is not communicating

properly with the sensor amplifier,

or an error exists with the sensor

amplifier.

If an error exists, the error code is

stored in error code (RWr[n] + 00).

0: No error

1: Error

RX[n] + 10

to 17

LO ID 01

to ID 08

Sends the LO output state (ON/

OFF) of the sensor amplifier.

The LO output of each sensor

amplifier (ID 01 to ID 08)

corresponds to each RX.

0: OFF

1: ON

RX[n] + 1F (Not used) - - -

RX[n] + 20

to 27

GO ID01

to ID08

Sends the GO output state (ON/

OFF) of the sensor amplifier.

The GO output of each sensor

amplifier (ID 01 to ID 08)

corresponds to each RX.

0: OFF

1: ON

RX[n] + 2F

System reserved

- Unusable -

RX[n] + 30

to 37

Alarm output

ID 01 to ID 08

*1 -

0: OFF

1: ON

RX[n] + 3F

System reserved

- Unusable -

RX[n] + 40

to 4E

(Not used)

ID 01 to ID 08

- - -

RX[n] + 4F

System reserved

- Unusable -

RX[n] + 50 Sensor ready *4

Used when communicating under

handshake control program.

This is output when command

execution is ready.

0: In preparation

1: Ready

RX[n] + 51

Command

complete

Used when communicating under

handshake control program.

This is output when command

execution is complete.

0->1:

Execution

complete

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 77 78

Comments to this Manuals

No comments

Keyence DL-CL1 User Manual Page 32

Comments to this Manuals

Related products and manuals for Sensors Keyence DL-CL1