Keyence DL-CL1 User Manual download pdf (Page 22)

2-6

Connection and Configuration

- CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-MH) -

2-2

Wiring

This section describes how to wire the DL-CL1.

• Turn off the power before starting the cabling operation.

• For more information about the CC-Link system, including cable

length and cabling methods, refer to the document of the CC-Link

master unit.

Use the following procedures to connect the DL-CL1 to the CC-Link system.

 Usable cables

For connection between the DL-CL1 and the CC-Link system, use CC-Link cables

(Ver. 1.10 or later) a ccredited by the CC-Link Partner Association.

CC-Link cables (for Ver. 1.10) are available as optional items.

OP-79426 (20 m) OP-79427 (100 m)

To ensure normal communication, only use the CC-Link cables .

 Trimming the cable

Strip the cable sheath.

Strip approximately 50 mm of the sheath from the end of the CC-Link cable,

with care to avoid damaging the shield braid of the cable.

Point

Connecting to the CC-Link System

Point



Sheath

Shield braid

Approx. 50 mm

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

No comments

Keyence DL-CL1 User Manual Page 22