Keyence DL-CL1 User Manual download pdf (Page 36)

3-2 Device Maps

3-8

- CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-MH) -

Communicating with the FD-MH series

* "nn" denotes the ID number in hexadecimal of sensor amplifier. (Example: 01h for ID01, ..., 0Ah for

ID10)

If there are multiple errors, the smallest error code is stored in the remote register.

 Command response list

0004 Mixed connection error

A foreign sensor amplifier (i.e.,

one that cannot be intermixed)

is connected.

Remove the foreign sensor

amplifier.

0006 Number-of-units error

More sensor amplifiers are

connected than are permitted.

Observe the number of

connectable sensor amplifiers.

0007

Sensor-to-sensor

communication error

An error exists in the

communication between

sensor amplifiers.

Check the connections of the

sensor amplifiers, and then turn

off the power and back on.

nn01

Error 1 for sensor amplifier

of ID number nn

Head error (ErS)

Refer to the FD-MH series

instruction manual.

nn02

Error 2 for sensor amplifier

of ID number nn

Head connection error (ErH)

nn03

Error 3 for sensor amplifier

of ID number nn

Overcurrent error (ErC)

nn04

Error 4 for sensor amplifier

of ID number nn

EEPROM error (ErE)

nn05

Error 5 for sensor amplifier

of ID number nn

(Not used)

nn06

Error 6 for sensor amplifier

of ID number nn

nn07

Error 7 for sensor amplifier

of ID number nn

Backflow error (rEv)

nn08

Error 8 for sensor amplifier

of ID number nn

(Not used)

nn09

Error 9 for sensor amplifier

of ID number nn

Temperature lower limit error

nn0A

Error 10 for sensor amplifier

of ID number nn

Temperature upper limit error

nn0B

Error 11 for sensor amplifier

of ID number nn

Temperature sensor connection

error

(Err tEMP)

Error Information

(HEX)

Description Cause Corrective action

Response

(HEX)

Name Description

0000 Successfully completed. The command has been processed successfully.

0001 Command number error The command number is out of range.

0002 Data category error The data category value is out of range.

0003 ID number out of range The ID number of sensor amplifier is out of range.

0004 Data number out of range The data number is out of range.

0007 Sensor-to-sensor communication error An error exists in the communication between sensors.

0008 Motion command access error Cannot read/write to motion command data numbers.

0009

Motion command data number ou t of

range

The data number of motion command is out of range.

000A Motion command execution error Failed to execute the motion command.

000B Read inhibit Write-only data number. Cannot be read.

000C Operating status error

Command communication (reading) is temporarily

prohibited because of the operating status of the

sensor amplifier.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 71 72

Comments to this Manuals

No comments

Keyence DL-CL1 User Manual Page 36

Comments to this Manuals

Related products and manuals for Sensors Keyence DL-CL1