Keyence IV Series User Manual download pdf (Page 61)

5-3

- IV Series User’s Manual (Field Network) -

Data I/O communication setting method

This following explains the setting method when

using the data I/O communication.



To control the IV series using the PROFINET

communication, select [Network connection] for the

sensor connection setting. When connected directly, the

eld network settings will be greyed out and disabled.



The PROFINET function will stop if the scanner is

connected directly while the PROFINET function

is in use. To use the PROFINET function again,

you need to restart the sensor.



If you have modied the protocol settings, the

connection with the sensor will be terminated and

then restarted.

Setting the IV series

You can congure the following settings for the IV series

using the monitor (IV-M30) or IV-Navigator (IV-H1).

When settings on the monitor (IV-M30)

Set the eld network settings of the sensor to

[PROFINET].

Touch the [Sensor expansion settings]

button on the sensor settings menu screen.

Touch the [Environment setting] button,

followed by the [Network expansion

setting] button.

Touch the [Settings] button for the eld

network.

Select [PROFINET] for the protocol.

Select [Enabled] if you wish to enable the

data handshake control.



If the protocol is set to [Disabled], the

settings will be greyed out and disabled.



If data handshake control has been set

to [Enabled], the status result will not be

updated until [Result acquisition complete

notice] (Address2, Bit0 of Command Control)

is input.

“Operating procedure of the data I/O

communication” (Page 5-32)

Once you have nished conguring the

settings, touch the [OK] button.

Data I/O communication setting method

Data I/O communication

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 109 110

Comments to this Manuals

No comments

Keyence IV Series User Manual Page 61

Comments to this Manuals

Related products and manuals for Sensors Keyence IV Series