Keyence DL-CL1 User Manual download pdf (Page 32)

3-4

Communicating with the FD-MH series

- CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-MH) -

3-2

Device Maps

The device maps vary as described in "Selecting an Operating Mode of the DL-

CL1" (page 3-3). Select an operating mode suited for the functions of the sensor

amplifiers to be used, before accessing each device.

The following device maps are used for when the operating mode is small-memory

mode 1, small-memory mode 2, or monitor mode 1.

In cases of monitor mode 2, full mode 1, and full mode 2, see "Device Maps for

Monitor Mode 2, Full Mode 1, and Full Mode 2" (page 3-10).

 Remote Input RX (DL-CL1 -> Master Station)

Device Maps for Small-Memory Mode 1, Small-Memory Mode 2, and Monitor Mode 1

Operating

mode

Device no.

(HEX)

Name

Communication

method

Description Reading range

Small-memory mode 1

Small-memory mode 2

Monitor mode 1

RX[n] + 00

to 09

Output-1 ID 01

to ID10

Sends the output-1 state (ON/OFF) of the

sensor ampliﬁ er.

The output-1 of each sensor ampliﬁ er (ID 01

to ID 10) corresponds to each RX.

0: OFF

1: ON

RX[n] + 0F Error state -

The DL-CL1 is not communicating properly

with the sensor ampliﬁ er, or an error exists

with the sensor ampliﬁ er.

If an error exists, the error code is stored in

error code (RWr[n] + 00).

0:No Error

1:Error

RX[n] + 10

to 19

Output-2 ID 01

to ID10

Sends the output-2 state (ON/OFF) of the

sensor ampliﬁ er.

The output-2 of each sensor ampliﬁ er (ID 01

to ID 10) corresponds to each RX.

0: OFF

1: ON

RX[n] + 1F (Not used) - -

RX[n] + 20

to 29

Output-3 ID 01

to ID10

Sends the output-3 state (ON/OFF) of the

sensor ampliﬁ er.

The output-3 of each sensor ampliﬁ er (ID 01

to ID 10) corresponds to each RX.

0: OFF

1: ON

RX[n] + 2F System reserved - Unusable

RX[n] + 30

to 39

(Not used) - -

RX[n] + 3F System reserved

- Unusable

RX[n] + 40

to 49

(Not used) - -

RX[n] + 4F System reserved - Unusable

RX[n] + 50 Sensor ready *3

Used when communicating under handshake

control program.

This is output when command execution is

ready.

0: In preparation

1: Ready

RX[n] + 51

Command

complete

Used when communicating under handshake

control program.

This is output when command execution is

complete.

0->1: Execution

complete

RX[n] + 52 Command error *3

Used when communicating under handshake

control program.

This is output when an error occurs during

command execution.

0:No Error

1:Error

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Comments to this Manuals

No comments

Keyence DL-CL1 User Manual Page 32

Comments to this Manuals

Related products and manuals for Sensors Keyence DL-CL1