Keyence FS-N10 Series User Manual download pdf (Page 25)

3-1 Quick Reference

3

Basic Operation

3-3

- Digital Fiber Sensor FS-N10 Series User's Manual -

* Not available for the FS-N10 Series shipped before March 10, 2011.

Loading the

recommended set-

tings

15

Load the recommended settings.

(Recipe function)

1. Press and hold the [SET] button and [PRE-

SET] button.

2. Display the LoAd screen with the ( )

button, and press the [MODE] button.

3. Select the recipe such as r-1 FALL with the

() button.

4. Press the [MODE] button to execute.

3-19

Initializing the set-

tings

16

Initializing (Restore to factory default

settings)

1. Press and hold the [SET] button and [PRE-

SET] button.

2. Press the [MODE] button while on the rSt

screen.

3. Select init with the ( ) button.

4. Press the [MODE] button to execute.

3-21

Displaying the out-

put 2 display

screen with the

2-output type

17 Switch to the output 2 display screen.

Set the channel switch to .

* The output 2 sensitivity and advanced set-

tings can be modified in this state.

4-35

Switching to the

maximum received

light intensity

power mode

18

Adjust the power mode to the MEGA

mode.

Set the power select switch to .

3-22

Preventing

incorrect

operations

19 Activat

ing the key lock

Pr

ess and hold the [MODE] button and the

() button simultaneously.

3-23

20 Deactivating the key lock

Press and hold the [MODE] button and the

() button simultaneously.

3-23

21

Activating the password-protected key

lock

1. Press the ( ) button10 times while

holding down the [MODE] button.

2. Input the password with the ( ) button.

3. Press the [MODE] button to execute.

3-24

22

Deactivating the password-protected

key lock

1. Press the ( ) button 10 times while

holding down the [MODE] button.

2. Input the password with the ( ) button.

3. Press the [MODE] button to deactivate the

key lock.

3-24

Others

(Advanced

function settings,

etc.)

23 Setting the advanc

ed functions Press an

d hold the [MODE] button. 4-1

24

Setting to rescale at each preset exe-

cution so that analog output is "5 V"

output in respect to "100.0".

*

1. Press and hold the [MODE] button, but-

ton and [SET] button simultaneously.

2. Press the [MODE] button once or twice.

3. Select "Pr-A PrST" with ( ) button, and

press the [MODE] button.

4-22

25

Switching the display to extended dis-

play or received light intensity hold

display, etc. (sub-display)

After setting the sub-display with the advanced

function settings, press the [MODE] button

twice.

4-23

26

Resetting the following values

* Received light intensity hold value

* Excess gain hold value

* Output when output 2 is in limit set-

ting detection mode

Press and hold the [MODE] button and [SET]

button.

4-25

4-36

Saving and

loading the

settings

27 Saving the settings (custom save)

1. Press and hold

the [SET] button and [PRE-

SET] button.

2. Display the SAvE screen with the ( )

button, and press the [MODE] button.

3. Select yES with the ( ) button.

4. Press the [MODE] button to execute.

4-39

28 Loading the settings (user reset)

1. Press and hold the [SET] button and [PRE-

SET] button.

2. Press the [MODE] button on the rSt screen.

3. Select USEr with the ( ) button.

4. Press the [MODE] button to execute.

4-40

Purpose Description Operation procedures

Reference

page

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 115 116

Comments to this Manuals

No comments