Keyence FS-N10 Series User Manual download pdf (Page 89)

5-1 Specifications

Specifications

5-3

- Digital Fiber Sensor FS-N10 Series User's Manual -

*1 For M8 connector type, cable length must be 30 m or less.

*2 Increased by 100 mW (4.0 mA) for HIGH SPEED mode.

*3 One or two units connected: -20 to +55 °C; 3 to 10 units connected: -20 to +50 °C,

11 to 16 units connected: -20 to +45 °C. When using 2-output type, one unit is counted as two units.

All temperature specifications are for when the unit is mounted on a DIN rail; and installed on metal frame.

2-Output Type

Type 2-Output Type

Input/Output configuration

Cable

M8 connector

Main unit/Expansion Units Main unit Expansion unit Main unit Expansion unit

Models NPN FS-N13N FS-N14N --

PNPFS-N13P FS-N14P FS-N13CP FS-N14CP

Number of

input/out-

put

Control output 2-output2-output2-output2-output

Monitor output

(1-5V)

--- -

External input1-input1-input- -

Light source LED Red 4-element LED (Wavelength: 630 nm)

Response time 50us(HIGH SPEED)/250us(FINE)/500us(TURBO)/1ms(SUPER)/4ms(ULTRA)/16ms(MEGA)

Output toggle Light-ON/Dark-ON toggle

Timer functions Timer OFF/OFF delay/ON delay/One-shot

Input/Out-

put specifi-

cations

Control output

(NPN)

NPN open collector 24 V or less, 2-output maximum 100 mA or less (used stand-alone)/20 mA or

less (multiple connections)

Residual voltage: 1V or less

Control output

(PNP)

PNP open collector 24 V or less, 2-output maximum 100 mA or less (used stand-alone)/20 mA or

less (multiple connections)

Residual voltage: 1V or less

External inputInput time: 2 ms(ON) / 20 ms(OFF) or more. 25 ms(ON/OFF) or more only when toggled to

external calibration input

Expansion units Up to 16 units can be connected (total connection of 17 units including the main unit); 2-output

type is treated as 2 units, however.

Protection circuit Protection against reverse power connection, output overcurrent and output surge

Number of interference preven-

tion units

Up to 16 units can be connected, but may differ depending on the power mode.

0 for HIGH SPEED; 4 for FINE and 8 for TURBO/SUPER/ULTRA/MEGA

(These numbers double when "Double" is selected.)

Rating Supply voltage DC12-24V±10%, ripple (P-P) 10% or less

Power consumption

(NPN output type)

Normal: 900 mW or less (36 mA or less at 24 VDC; 48 mA or less at 12 VDC)

ECO ON (All): 800 mW or less (32 mA or less at 24 VDC; 39 mA or less at 12 VDC)

ECO Full: 470 mW or less (19 mA or less at 24 VDC; 23 mA or less at 12 VDC)

Power consumption

(PNP output type)

Normal: 1050 mW or less (42mA or less at 24 VDC; 56mA or less at 12 VDC)

ECO ON (All): 950 mW or less (38mA or less at 24 VDC; 47mA or less at 12 VDC)

ECO Full: 600 mW or less (24mA or less at 24 VDC; 29mA or less at 12 VDC)

Environ-

ment resis-

tance

Operating ambient

luminance

Incandescent lamp: 20,000 lx or less; solar light: 30,000 lx or less

Operating ambient

temperature

-20 °C to +55 °C (no freezing)

Operating ambient

humidity

35 to 85% (no condensation)

Vibration resistance 10 to 55 Hz Compound amplitude 1.5 mm, two hours for each of X, Y and Z axes

Shock resistance

500m/s

, 3 times for each of X, Y and Z axes

Case material Both main unit and cover material: Polycarbonate

Case dimensions H30.3mm×W9.8mm×L71.8mm

Mass Approx. 80g Approx. 70g Approx. 22g Approx. 22g

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 115 116

Comments to this Manuals

No comments

Keyence FS-N10 Series User Manual Page 89

Comments to this Manuals

Related products and manuals for Sensors Keyence FS-N10 Series