Keyence SL-V Series User Manual download pdf (Page 113)

4-5

Wiring

SL-V-M-NO4-E

4-4 Examples of Wiring

 When using a simple function type cable (PNP output type cable)

• The shielding wire of the PNP output type cable is connected to 0 V line in the SL-V.

Do not connect the shielding wire to +24 V line.

• If there is some open wires (completely disconnected), they will need to be capped.

Automatic reset mode

When using OSSD only

Automatic reset mode

When not using the EDM function

Caution

Cable insulation: Black

Cable insulation: Grey

Transmitter

Receiver

(Interlock-reset-ready output) Green

(+24 V) Brown

(OSSD2) White

(OSSD1) Black

(Reset input) Yellow

(EDM input) Red

(Wait input) Violet

(AUX output) Red

(0 V) Blue

Shield

(Interlock mode selection input) Pink

Orange/black

(Communication cable 2)

Orange

(Communication cable 1)

K1, K2 :External device (Safety relay unit, etc.)

K1, K2 : External device (Safety relay unit, etc.)

K3 : Solid state contactor

S1 : The switch for wait input (N.O.)

The violet wire needs to be capped it is not used.

(Open circuit : completely disconnected)

S2 : The switch for releasing lockout condition (N.C.)

The yellow wire must be short-circuited to +24 V if

this function is not used.

M : 3-phase motor

PLC : For the monitoring use

*1 These are NON SAFETY-RELATED system.

K2K1

IN OUT

PLC